Traxxas Slash Maintenance?

The Traxxas Slash is a great RC car, but like any car it needs regular maintenance to keep it running its best. Here are some tips on how to maintain your Slash: 1. Check the tires regularly and make sure they are inflated to the correct pressure.

You don’t want your tires to be too low or too high, as this can affect handling and performance. 2. Inspect the body for cracks or damage and repair or replace as necessary. A damaged body can cause drag and affect the way your car handles.

3. Keep an eye on the battery level and recharge when needed. A dead battery will obviously prevent your car from running at all! 4. Brushless motors require more maintenance than traditional brushed motors, so if you have a brushless motor in your Slash be sure to check it regularly for wear and tear.

5. Finally, just keep an eye on all the moving parts of your Slash and make sure everything is tight and secure – loose screws can cause all sorts of problems down the road!

The Traxxas Slash is a great RC truck for both beginners and experienced drivers alike. But like any RC vehicle, it needs regular maintenance to keep it running its best. Here are a few tips on how to maintain your Slash:

1. Check the battery regularly. The battery is the heart of any RC vehicle, and the Slash is no exception. Make sure to check it regularly for signs of wear or damage.

If you notice anything unusual, replace the battery immediately. 2. Keep an eye on the tires. The tires on your Slash take a lot of abuse, so they need to be checked often for wear and tear.

Inspect them after every run and look for signs of balding or cracking. If you see either of these, it’s time to replace the tire. 3. Clean the body regularly.

Over time, dirt and grime will build up on the body of your Slash (especially if you drive in dusty conditions). This can affect both its appearance and performance, so make sure to clean it often with soap and water (or a mild cleaning solution). 4 .

Lubricate all moving parts . Just like any other machine, the various moving parts on your Slash need to be lubricated periodically . This helps reduce friction, prevent premature wear , and keep everything running smoothly .

Be sure to use only approved lubricants , as using something else could damage your truck . 5 Don’t forget about preventive maintenance! In addition to these regular maintenance tasks , it’s also important to do some preventive maintenance on your Slash . This includes things like checking screws and bolts for tightness , greasing drivetrain components , etc . By doing this , you can help avoid major problems down the road . Following these simple tips will help keep your Traxxas Slash in top condition so that you can enjoy driving it for years to come !

Traxxas Slash Maintenance?


How Do I Clean My Traxxas Slash?

To clean your Traxxas Slash, simply remove the body and use a mild soap and water solution to clean the truck. Be sure to rinse all of the soap off, as it can be corrosive to the paint. Once the truck is dry, you can reattach the body and get back to racing!

What Parts Break the Most on a Traxxas Slash?

One of the most popular questions we get here at Traxxas is “What parts break the most on a Slash?” While it’s impossible to give a definitive answer since everyone drives their Slash differently, there are some common patterns we’ve seen over the years. Here are the five most common parts that break on a Slash:

1. Front and rear suspension arms: These are the most vulnerable parts of your Slash’s suspension, and they’re also some of the easiest and cheapest to replace. If you bash your Slash hard enough, you’re likely to bend or break one (or both) of these arms. 2. Center differential: The center diff is what transfers power from the transmission to the front and rear axles.

It’s located in the middle of your Slash, right under the chassis. If you drive your Slash hard enough, you can damage or even destroy this part. Fortunately, it’s relatively easy and inexpensive to replace.

3. Rear axle shafts: These shafts connect your rear wheels to your differential, and they’re susceptible to breaking if you bash your Slash too hard. Fortunately, they’re also easy (and relatively inexpensive) to replace. 4. Body: The body is arguably the most vulnerable part of your Slash, and it doesn’t take much to dent, scratch, or crack it.

In fact, many people upgrade to a stronger aftermarket body as soon as they start having durability issues with their stock body. 5. Wheels: While not as vulnerable as other parts on this list, wheels can still be damaged if you hit something hard enough (or if you land badly after a jump).

Can I Drive My Traxxas Slash in the Rain?

The Traxxas Slash is a great RC car for driving in the rain. However, there are a few things you need to keep in mind when driving your Traxxas Slash in the rain. First, make sure that your batteries are fully charged.

You don’t want your batteries to die while you’re driving in the rain. Second, make sure that your radio system is waterproof. Otherwise, you could damage your radio and lose control of your Traxxas Slash.

Third, make sure that you have good tires on your Traxxas Slash. You don’t want to slip and slide all over the place while you’re trying to drive in the rain. Fourth, go slowly!

It’s easy to lose control of your Traxxas Slash if you’re going too fast in the rain. So take it easy and enjoy the ride!

Can Traxxas Motors Get Wet?

While Traxxas motors are waterproof, it is not recommended to operate them in water for long periods of time as this will shorten the life of the motor. If your motor does get wet, be sure to dry it off as soon as possible to prevent corrosion.

How To Maintain Clean & Re Oil Traxxas 1/10 4×4 Differentials (Slash, Stampede, & Rally)

Traxxas Maintenance

Traxxas Maintenance As a new Traxxas owner, it’s important to familiarize yourself with the basics of Traxxas vehicle maintenance. While most of the work can be performed by Traxxas Service Centers, there are some things you can do at home to keep your investment running like new.

The first step is to read through your Owner’s Manual and get acquainted with the different parts of your vehicle. This will help you understand how everything works together and what needs to be done to keep things running smoothly. Next, take some time to inspect your vehicle regularly.

This includes checking for loose screws, damaged parts, and making sure all the moving parts are properly lubricated. These simple checks can save you from big problems down the road. If you do notice any damage or wear, don’t hesitate to reach out to a Traxxas service center for assistance.

They have the experience and knowledge to get your vehicle back in tip-top shape in no time!

How to Make Traxxas Slash Faster

If you’re looking to make your Traxxas Slash faster, there are a few things you can do. First, upgrade the motor and battery. This will give you more power and speed.

Second, add a high-performance exhaust system. This will help improve airflow and increase power. Finally, install bigger tires and wheels.

This will help with traction and allow you to go faster around turns. With these upgrades, your Traxxas Slash will be able to reach its full potential on the racetrack!

Traxxas Slash Tips And Tricks

If you’re looking for tips and tricks to get the most out of your Traxxas Slash, you’ve come to the right place! In this article, we’ll share some of our favorite Slash-specific tips and tricks that will help you take your bashing to the next level. One of the first things you should do when setting up your Slash is to adjust the slipper clutch.

This simple adjustment can make a big difference in how your truck performs. We recommend starting with a setting of 4 on the slipper clutch dial. This will give you plenty of traction while still allowing the wheels to slip under hard acceleration or when climbing steep hills.

Next, be sure to check your tire pressure before each bash session. The correct tire pressure will vary depending on the terrain you’re running on, but a good rule of thumb is 2.8-3.0 psi for loose dirt and 3.5-4.0 psi for packed dirt/gravel surfaces. If you find yourself getting stuck often, one way to improve traction is by installing taller tires on the rear of your Slash.

This will help keep the rear end from digging into the ground as much and will give you better overall traction.

How to Clean a Traxxas Slash

If you own a Traxxas Slash, then you know that it’s one of the most popular RC cars on the market. But what you may not know is how to properly clean your Slash so that it stays in top condition. Here are some tips on how to clean a Traxxas Slash:

1. Remove all dirt and debris from the body of the car. This can be done with a soft cloth or brush. 2. Clean the wheels and tires with soap and water.

Be sure to rinse them off completely afterwards. 3. Wipe down the interior of the car, including all electronics, with a damp cloth. 4. Use a cotton swab soaked in rubbing alcohol to clean any dirty areas on the outside of the car body.


If you’re the proud owner of a Traxxas Slash, congratulations! You’ve made a great choice – the Slash is one of the most popular RC trucks on the market. But like any vehicle, it needs regular maintenance to keep it running its best.

In this blog post, we’ll run through some of the basics of Traxxas Slash maintenance. We’ll start with the battery. The Slash uses a NiMH or LiPo battery, and both types need to be cared for properly.

NiMH batteries should be discharged completely before being charged again, while LiPo batteries should never be allowed to discharge below 20%. Both types should be stored in a cool, dry place when not in use. The next thing to check is the tires.

The Slash comes with all-terrain tires that can handle just about anything, but they will eventually wear down. Inspect them regularly for cracks or other damage, and replace them when necessary. The drivetrain is another important part of the Slash that needs regular maintenance.

Keep an eye on the differential fluid level and top it off as needed; if it starts to look dirty, it’s time for a full change. The gear mesh should also be checked periodically; if it’s too loose or too tight, it can cause problems down the road. Finally, don’t forget about general cleaning and inspection!

Wipe down your Slash after each use to remove dirt and debris; if something does get caked on (like mud), make sure to clean it off as soon as possible so it doesn’t cause any damage. Once in awhile, take some time to really inspect your truck – look for cracks or breaks in plastic parts, loose screws or bolts, etc.

Michael Sayers

Hi, this is your friend Michael Sayers. I’m an automobile engineer, but I have become an expert on RC cars. Seems funny to you! After graduating in automobile engineering, I worked for a renowned car manufacturing company for six months only. A few months later, I joined a popular RC vehicle manufacturing company as a quality in charge. However, I’ve created this site Altimarc, to share my decade of experience with people looking for an RC vehicle who don’t have adequate knowledge about that.

Recent Posts