If you have a Traxxas TQ remote and are looking for ways to link it, there are a few things you can try. One option is to use the Traxxas Link app, which is available for both Android and iOS devices. This app will allow you to connect your TQ remote to your phone or tablet so that you can control your vehicle from the app.
Another option is to use a third-party radio system such as the FrSky Taranis, which will also allow you to link your TQ remote.
- Power on your Traxxas TQ remote control
- Press and hold the “Link” button on the back of the remote until the LED light begins to blink
- With the Link button still held, press and release the “Set” button on the top of the remote four times rapidly
- The LED will stop blinking and remain lit to indicate that it is in linking mode
- On your Traxxas model, locate the bind plug port
- This will be found under a small cover plate or hatch near either the receiver box or speed control unit
- Insert the bind plug into the Bind Plug Port while continuing to hold down the Link button on your remote control
- The LED indicator on both the remote and model will turn solid to show that they are linked successfully
- You can now release both buttons
Contents
How to Bind a Traxxas Transmitter and Receiver
How Do You Reset a Traxxas Tq Remote?
If you need to reset your Traxxas TQ remote, there are a few simple steps you can follow. First, make sure that the batteries in both the remote and the receiver are fresh and fully charged. Next, disconnect the battery from the receiver.
Once the battery is disconnected, press and hold down the button on the transmitter marked “SET” for about three seconds. After a few seconds have passed, release the button and then re-connect the battery to the receiver. Finally, turn on your transmitter and then your vehicle.
Your Traxxas TQ remote should now be reset!
How Do I Reprogram My Traxxas Remote?
Assuming you have a Traxxas remote that came with a Traxxas vehicle, the process for reprogramming is pretty simple. You’ll need to:
1. Locate the bind button on your remote.
This will usually be clearly marked and easy to find.
2. Turn on your vehicle and then press and hold the bind button on the remote until the LED on the remote begins flashing rapidly.
3. Once the LED is flashing rapidly, release the bind button and then press and hold the throttle trigger all the way down.
After a few seconds, you should hear two quick beeps indicating that binding was successful and your vehicle is now ready to drive!
How Do You Link a Traxxas 2.4 Ghz?
In order to link a Traxxas 2.4 Ghz radio system, you will need to follow these steps:
1. Turn on both the transmitter and receiver.
2. Press and hold the pairing button on the back of the transmitter until the LED light begins to blink rapidly.
3. While continuing to hold the pairing button, press and release the binding/pairing button on the back of the receiver. The binding/pairing LED on the receiver should begin to blink rapidly as well.
4. When both lights are blinking rapidly, release both buttons and your radio system will be linked!
How Do I Program My Traxxas Tq Radio?
In order to program your Traxxas TQ radio, you will need to first connect it to your computer via the USB cable. Once connected, open up the Traxxas Link software. In the “Model Selection” tab, make sure that the correct model is selected.
Then, click on the “Radio Settings” tab. Here, you will be able to adjust all of the various settings for your radio. Make sure to click “Save” after making any changes.
Credit: www.youtube.com
How to Reset Traxxas Tq Transmitter
If you’re like most people, you probably don’t think about resetting your Traxxas TQ transmitter very often. But if you ever need to do it, it’s important to know how. Here’s a step-by-step guide on how to reset your Traxxas TQ transmitter:
1. Turn off the transmitter and unplug the battery.
2. Remove the back cover of the transmitter.
3. Locate the small black button near the center of the circuit board.
This is the reset button.
4. Press and hold the reset button for 5 seconds while simultaneously plugging in the battery. Continue to hold the reset button until the LED on the transmitter starts flashing (this should take about 10 seconds).
Once the LED starts flashing, release the reset button and reattach the back cover of the transmitter. Your transmitter is now reset!
Traxxas Tq Transmitter Manual
If you’re looking for the Traxxas TQ Transmitter Manual, look no further! Here’s everything you need to know about this amazing transmitter.
The Traxxas TQ transmitter is one of the most popular RC transmitters on the market.
It’s packed with features and is extremely user-friendly. The manual that comes with it is also very helpful in getting started with using the transmitter.
One of the best things about the Traxxas TQ transmitter is its versatility.
You can use it for a variety of different RC vehicles, including cars, trucks, boats, and planes. It’s also compatible with a wide range of receivers, so you can use it with just about any type of RC vehicle you have.
Another great thing about the Traxxas TQ transmitter is its durability.
It’s made from high-quality materials and can withstand a lot of wear and tear. This makes it a great choice for those who are hard on their equipment or who travel often with their RC vehicles.
Overall, the Traxxas TQ transmitter is an excellent choice for anyone looking for a high-quality, versatile, and durable RC transmitter.
If you’re looking for a manual to help you get started with using this amazing piece of equipment, look no further!
Traxxas Tqi Won’T Bind
If you’ve ever experienced the frustration of trying to bind your Traxxas Tqi radio to your receiver, only to have it not work, you’re not alone. It’s a common problem that can be caused by a number of different factors. Let’s take a look at some of the most common reasons why your Tqi won’t bind, and how to fix them.
One of the most common reasons for binding issues is using the wrong type of receiver. The Tqi radio is only compatible with Traxxas Link receivers – using any other type of receiver will almost certainly result in binding problems. If you’re not sure which type of receiver you have, consult your user manual or contact Traxxas customer support for assistance.
Another common reason for binding issues is interference from other electronic devices. This can include things like cell phones, computers, microwaves, and even fluorescent lights. If you suspect that interference might be causing your binding problems, try moving your radio and receiver away from any other electronics and see if that solves the issue.
Finally, another possibility is that the firmware on your Tqi radio or receiver needs to be updated. Firmware updates are occasionally released by Traxxas in order to improve performance or address specific issues like binding problems. You can check the Traxxas website (www .traxxas .com)to see if there are any firmware updates available for your particular model Radio or Receiver .
Updating the firmware is usually a pretty simple process – just follow the instructions on the website carefully and you should be good to go!
Conclusion
Traxxas’ TQ remote is a fantastic tool for those looking to get the most out of their RC experience. The TQ allows you to adjust settings on your vehicle from a distance, making it easier to fine-tune your driving experience. In this article, we’ll show you how to link your TQ remote to your Traxxas vehicle so you can start enjoying the benefits of this great tool.
