How to Fiberglass Rc Plane?

If you want to fiberglass an RC plane, there are a few things you need to know. The first is that you need to use a release agent when working with fiberglass. This will prevent the fiberglass from sticking to your tools and surfaces.

You also need to be careful when cutting the fiberglass, as it can be sharp. Wear gloves and eye protection when working with it. Finally, make sure you sand down the edges of the fiberglass before applying any finishes.

  • Choose the right type of resin for your project
  • Mix the resin and hardener together according to the instructions on the packaging
  • Apply the mixture to your surface using a brush or roller
  • Allow the mixture to cure according to the instructions on the packaging
  • Sand the surface smooth if necessary
How to Fiberglass Rc Plane?


How Do You Make a Fiberglass Foam Rc Plane?

When it comes to making a RC plane out of fiberglass foam, there are a few things that you will need to take into account. The first is the type of foam that you will be using. There are two main types of foam that can be used for this project, expanded polystyrene (EPS) and extruded polystyrene (XPS).

EPS is the most commonly used type of foam for RC planes, as it is lighter and easier to work with than XPS. However, XPS is more durable and will provide a better finished product. The next thing to consider is the size of the plane that you want to make.

Fiberglass foam planes can range in size from small indoor flyers to large scale models. The larger the plane, the more expensive and difficult it will be to build. Therefore, it is important to decide on a size before starting your project.

Once you have decided on the type and size of foam that you want to use, you can begin construction. The first step is to create a template for your plane using either cardboard or plywood. Once you have your template, cut out all of the pieces that you will need from your foam sheets using a hot wire cutter or sharp knife.

Now it’s time to start assembling your plane! Begin by gluing or taping together the fuselage halves using either CA glue or epoxy resin. If you are using EPS foam, be sure to use low-temperature glue so that it doesn’t melt the foam.

Once the fuselage halves are glued together, reinforce them by adding strips of fiberglass cloth around the perimeter with more glue or resin. Next, attach the wings onto the fuselage using either tape or small screws/bolts. Again, if you are using EPS foam make sure to use low-temperature adhesive so as not damage the wing structure when attaching them.

Finally, add any other desired details such as control surfaces (ailerons & elevator), landing gear struts & wheels, etc… And that’s it! You’ve now successfully built yourself a fiberglass foam RC plane!

Which Material is Best for Making Rc Plane?

There are a variety of materials that can be used to make RC planes. The most common material is foam, as it is lightweight and easy to work with. However, other materials such as balsa wood and carbon fiber can also be used.

The best material for an RC plane will depend on the specific requirements of the plane. For example, if the plane needs to be very lightweight, then foam would be the best choice. However, if the plane needs to be durable, then balsa wood or carbon fiber would be better choices.

How Do You Get Wrinkles Out of an Rc Plane?

If you have ever flown an RC plane, you know that they can be a lot of fun. But, if you have ever had one that has gotten wrinkled, you know that it can be a bit of a pain to get the wrinkles out. Here are a few tips on how to get wrinkles out of an RC plane:

1. Use an iron – This is probably the quickest and easiest way to get rid of wrinkles in your RC plane. Just set your iron to a low setting and lightly run it over the wrinkled areas. Be sure not to leave the iron in one spot for too long, as you don’t want to melt any plastic parts.

2. Use a hairdryer – Another quick and easy way to remove wrinkles from your RC plane is to use a hairdryer. Just set it on low and hold it about 6 inches away from the wrinkled area. Move the dryer around until the wrinkle disappears.

3. Use boiling water – This method takes a little more time than the first two, but it will definitely get the job done. Boil some water and then carefully pour it over the wrinkled area (you may want to do this over your sink). Then, take a blunt object (like a spoon) and press down on the wrinkle until it flattens out.

Let the area dry completely before continuing to fly your plane. 4. Use steam – If you have access to a steamer, this is another great way to remove wrinkles from your RC plane. Just hold the steamer about 6 inches away from the wrinkled area and let the steam do its work!

Can an Rc Plane Break the Sound Barrier?

Yes, it is possible for an RC plane to break the sound barrier. In fact, there are a few RC planes that have been designed specifically to break the sound barrier. However, it should be noted that breaking the sound barrier is extremely dangerous and can easily lead to disaster.

As such, it is not recommended for anyone other than experienced professionals to attempt this feat.

how to fiberglass a RC airplane

Fiberglass Rc Plane Kits

Fiberglass rc plane kits are becoming increasingly popular among hobbyists and RC enthusiasts. There are several reasons for this popularity. First, fiberglass is a very strong and lightweight material that is ideal for constructing RC planes.

Second, fiberglass rc plane kits tend to be very affordable compared to other types of RC plane kits. And finally, fiberglass rc planes are generally easy to assemble and maintain. If you’re thinking about getting into the world of RC planes, then a fiberglass rc plane kit might be a good option for you.

In this blog post, we’ll take a look at some of the benefits of owning a fiberglass rc plane kit. We’ll also provide some tips on how to choose the right kit for your needs and budget. So let’s get started!

How to Fiberglass Edges

When working with fiberglass, it’s important to be mindful of the edges. If you’re not careful, the sharp edges of the material can cut through your clothing and skin, causing serious injury. Here are some tips for working with fiberglass edges:

1. Use a sharp knife or scissors when cutting fiberglass. This will help to avoid any potential accidents. 2. When handling pieces of fiberglass, always wear gloves and long sleeves.

This will protect your skin from being cut by the sharp edges of the material. 3. When sanding or grinding down Fiberglass Edges use a dust mask to avoid inhaling any harmful particles.

Glassing Model Aircraft

One of the most popular ways to finish model aircraft is by glassing them. Glassing involves covering the surface of the aircraft with a layer of fiberglass cloth and epoxy resin. This method provides a very strong and durable finish that can be sanded and polished to a high gloss.

It is also relatively easy to do, making it a great option for those new to modeling. There are two main types of fiberglass cloth that can be used for glassing: woven and non-woven. Woven cloth is made up of interlocking fibers that provide good strength and durability.

Non-woven cloth is made up of randomly oriented fibers and is often lighter weight than woven cloth. When choosing a fiberglass cloth for your project, consider the size of the aircraft and the type of finish you want. For smaller projects, or those where a smooth finish is desired, non-woven cloth may be the best option.

For larger projects, or those where a more rugged finish is desired, woven cloth may be the better choice. Once you have selected your fiberglass cloth, cut it into pieces that will fit easily onto your aircraft surface. If you are working with curved surfaces, you may need to score or wet out the fabric to help it conform to the shape.

Once in place, brush on a thin layer of epoxy resin and allow it to cure according to the manufacturer’s directions. After the first layer has cured, apply additional layers of both resin and fabric until you have built up enough thickness for your desired finish. Allow each successive layer to cure completely before adding another.

How to Fiberglass a Curve

If you’re looking to add some extra reinforcement to a curved surface, fiberglassing is a great option. Fiberglass is a strong and lightweight material that can be easily molded to fit the curve of your chosen surface. Here’s a step-by-step guide on how to fiberglass a curve:

1. Begin by creating a mold of the curve that you want to reinforce. You can do this by using plaster or another similar material. Once you have your mold, apply a release agent to it so that the fiberglass doesn’t stick.

2. Cut your fiberglass cloth into strips that will fit comfortably inside the mold. Wet the strips with resin, then lay them inside the mold one at a time, overlapping each strip slightly as you go. 3. Once all of the strips are in place, apply another layer of resin over top and allow it to cure for 24 hours.

4. Once the resin has cured, remove the mold and trim any excess fiberglass from around the edges of the curve. You should now have a reinforced and strengthened surface!


Building a radio controlled (RC) plane from scratch is a rewarding experience, especially if you end up with a aircraft that looks and flies great. In this article we will cover how to fiberglass an RC plane. This is not a difficult process, but does require some patience and attention to detail.

The first step is to lay out your materials. You will need: -Fiberglass cloth

-Resin (epoxy or polyester) -Hardener (for the resin) -Paintbrush

-Plastic spreader -Measuring cups/spoons (for the resin and hardener) You will also need something to use as a mold for your fiberglassed parts.

This can be anything from cardboard to foam core board to another piece of plywood. Whatever you use, just make sure it is sturdy enough to hold up during the fiberglassing process. Next, cut your fiberglass cloth into pieces that will fit over the areas you want to fiberglass.

It is important to have plenty of overlap on all sides, as you don’t want any bare spots in your final product. Once you have your pieces cut out, mix up your resin according to the manufacturer’s instructions. Be sure to follow these carefully, as using too much or too little hardener can result in a weak or brittle finished product.

Now it’s time to start applying the resin mixture to your project using the paintbrush. Work in small sections, and be sure brush it on evenly over the entire surface area. Once you have applied the mixture over all of your project’s surface area, lay down the fiberglass cloth pieces one at a time and smooth them down with your hands. Make sure there are no air bubbles trapped underneath, as this can weaken the overall structure of your project once it dries.

Michael Sayers

Hi, this is your friend Michael Sayers. I’m an automobile engineer, but I have become an expert on RC cars. Seems funny to you! After graduating in automobile engineering, I worked for a renowned car manufacturing company for six months only. A few months later, I joined a popular RC vehicle manufacturing company as a quality in charge. However, I’ve created this site Altimarc, to share my decade of experience with people looking for an RC vehicle who don’t have adequate knowledge about that.

Recent Posts