How to Charge Rc Car Battery Without Charger?

There are a few ways that you can charge your RC car battery without using a charger. One way is to use a power supply that is designed for charging RC batteries. Another way is to use a regular household battery charger.

You can also use a 12V DC power source to charge your RC car battery.

How to charge a rc car without charger

  • Connect the positive terminal of the battery to the positive terminal of the charger
  • Connect the negative terminal of the battery to the negative terminal of the charger
  • Plug in the charger to an outlet and turn it on
  • charging process will begins and will take some time to charge fully

How to Charge a Car Battery Without a Charger Or Another Car

If your car battery dies and you don’t have a charger or another car to jumpstart it, there are still ways to charge it. You can use a portable power pack, or even a 12Vdc power supply from a laptop computer. First, make sure that the clamps on the power pack are the right size for your battery terminals.

If they’re not, you can use jumper cables to connect them. Once the clamps are in place, turn on the power pack and let it run until the battery is fully charged. If you’re using a 12Vdc power supply, connect the positive lead to the positive terminal of the battery and the negative lead to either the negative terminal of the battery or any metal part of the car body (make sure that there’s no paint between the lead and metal).

Again, let the power supply run until the battery is fully charged.

How Long to Charge Remote Control Car Battery

When it comes to charging your remote control car battery, the general rule of thumb is to charge it for as long as it takes to use up a full tank of gas. However, there are a few things that you can do to help ensure that your battery lasts longer and charges faster. Here are a few tips:

1. Make sure that you always charge your battery in a cool, dry place. Extreme heat or cold can shorten the lifespan of your battery. 2. Never overcharge your battery.

This can damage the cells and shorten the overall life of the battery. 3. Invest in a good quality charger specifically designed for remote control car batteries. Cheap chargers can cause all sorts of problems, so it’s worth spending a little extra to get a good one.

How to Charge Rc Stunt Car

Are you the proud owner of an RC stunt car? If so, congratulations! These cars are a lot of fun to drive and can provide hours of enjoyment.

But before you can hit the gas and start doing donuts in your living room, you need to charge the battery. Here’s how to do it: First, locate the charging port on your car.

It will usually be located on the bottom of the car or on the side. Once you’ve found it, plug in the charger that came with your car. Next, find an outlet and plug in the other end of the charger.

Make sure that the charger is rated for RC cars – using a standard cell phone charger will not work and could damage your car. Once plugged in, flip the switch on the charger to begin charging. Most chargers have a light that will turn green when they’re done charging, but consult your manual if you’re unsure.

Do not overcharge your battery – this can shorten its lifespan significantly. Now that your battery is charged, unplug everything and put it away safely. Then it’s time to have some fun!

Remember to practice safe driving and always obey local laws while using your RC car.

Rc Car Charger Cable

An RC car charger cable is a must-have item for anyone who owns an RC car. This type of cable is used to charge the batteries that power your RC car. There are two main types of RC car charger cables: AC and DC.

AC chargers are the most common type and are used to charge NiCad and NiMH batteries. DC chargers are less common, but can be used to charge LiPo batteries. When choosing an RC car charger cable, you need to make sure that it is compatible with the type of battery you are using.

You also need to consider the length of the cable. Some people prefer shorter cables while others prefer longer ones. The important thing is that you choose a length that will allow you to easily reach the charging port on your RC car without having to move the car around too much.

Once you have an RC car charger cable, simply plug it into the appropriate port on your battery and then into an outlet. Most chargers have LED lights that indicate when the charging process is complete.

Atomic Whirlwind Remote Control Car How to Charge

Assuming you would like a blog post about how to charge an Atomic Whirlwind remote control car: It is important to know how to properly charge your Atomic Whirlwind remote control car in order to keep it functioning at its best. There are a few things to keep in mind when charging this type of RC car.

First, be sure to use the correct charger. The charger that comes with the car is specifically designed for it and will work best. However, if you need to use a different charger for some reason, make sure that it is made for RC cars and has the same voltage output as the original charger.

Using the wrong kind of charger can damage your car or cause it not to work at all. When you plug in the charger, pay attention to the light on the charger. It should turn red, indicating that it is working correctly and charging the battery.

If it does not turn red or starts blinking, there may be something wrong with the connection or the charger itself and you should stop using it immediately. Once plugged in, leave your car to charge for the recommended amount of time listed in the instructions manual. Overcharging can also damage your battery so be sure not go over this time limit.

Once fully charged, unplug your car from the charger and get ready for some fun!

How to Charge Rc Car Battery Without Charger?


How Can I Charge My Battery Without a Charger?

If your phone or laptop is running low on juice and you don’t have a charger handy, there are still a few ways that you can charge your battery without one. One option is to use a USB cable to connect your device to another power source, like a computer or TV. If you have access to an AC outlet, you can also use a power bank or portable charger to give your battery a boost.

And in a pinch, you can always try charging your device with batteries. Just be sure to use the right kind (AA, AAA, etc.) and size (9V, D, C) for your device.

How Do I Charge My Remote Control Car Battery?

If your remote control car battery is running low, you’ll need to charge it up before you can continue using your car. Fortunately, this is a simple process that only takes a few minutes. Here’s what you need to do:

1. Locate the charging port on your car. This is usually located on the underside of the car, near the front or rear. 2. Connect the charging cable to the charging port.

Make sure that the cable is firmly connected so that it doesn’t come loose during charging. 3. Plug the other end of the cable into a power outlet. You can use any standard household outlet for this purpose.

Can I Charge My Car Battery With a Cell Phone Charger?

No, you cannot charge your car battery with a cell phone charger. Your car battery needs a specific type of charger in order to function properly. If you try to use a cell phone charger, it will not work and could potentially damage your car battery.

Can I Charge a Car Battery With an Rc Car Charger?

It is possible to charge a car battery with an RC car charger, but it is not recommended. Car batteries are designed to be charged at a much higher rate than RC batteries, so using an RC charger could damage the battery or cause it to overheat. Additionally, most RC chargers do not have the correct voltage output for charging a car battery.

If you must use an RC charger to charge your car battery, make sure that the voltage output is set to the proper level for your car battery and that you are monitoring the charging process closely to avoid damaging the battery.


Do you want to know how to charge your RC car battery without a charger? It’s actually not that difficult, and there are a few different ways that you can do it. One way is to use a regular household battery charger.

You’ll just need to make sure that the charger is set to the correct voltage for your RC car battery. Another way is to use a 12 volt power supply from an automobile or boat. Just hook up the positive and negative leads from the power supply to the positive and negative terminals on your RC car battery, and it will charge just fine.

Michael Sayers

Hi, this is your friend Michael Sayers. I’m an automobile engineer, but I have become an expert on RC cars. Seems funny to you! After graduating in automobile engineering, I worked for a renowned car manufacturing company for six months only. A few months later, I joined a popular RC vehicle manufacturing company as a quality in charge. However, I’ve created this site Altimarc, to share my decade of experience with people looking for an RC vehicle who don’t have adequate knowledge about that.

Recent Posts