How to Build a Rc Trophy Truck?

To build a RC trophy truck, you’ll need a few things. First, you’ll need a radio controlled car. These can be bought at most hobby stores.

Next, you’ll need some batteries to power the car. Again, these can be bought at most hobby stores. Finally, you’ll need a track to race on.

This can be anything from a piece of carpet to an actual racetrack. Now that you have all the necessary materials, let’s get started! The first thing you’ll want to do is assemble the car according to the instructions that came with it.

Once that’s done, it’s time to install the batteries. Make sure they’re fully charged before proceeding. Now it’s time to hit the track!

  • Purchase a kit that contains the necessary parts to build a RC trophy truck
  • Most kits will include a chassis, body, shocks, tires and wheels
  • Assemble the chassis according to the instructions included with the kit
  • This will usually involve attaching the shocks and wheels to the chassis
  • Paint or decal the body of the truck according to your personal preferences
  • Install batteries in the truck and transmitter, then test drive it to make sure everything is working properly

Building an Rc Trophy Truck In 14 Minutes

How Much Does It Cost to Build Your Own Trophy Truck?

A trophy truck is a specialized off-road racing vehicle. They are built on a modified truck chassis and typically feature a V8 engine, high suspension travel, and large tires. Trophy trucks are expensive to build, with the cost of a complete build running upwards of $250,000.

The cost of building a trophy truck will vary depending on the specific components used and the level of customization desired. A basic build can start as low as $100,000, while a more deluxe custom build can easily cost twice that much or more. Some of the key components that will affect the cost of your trophy truck include:

Suspension: A typical trophy truck will have 14″ to 16″ of suspension travel in the front and rear. This can be accomplished with either coilover shocks or air shocks, but coilovers are generally considered superior for off-road use. Expect to pay around $10,000 for a good quality suspension setup.

Wheels & Tires: Most trophy trucks run on 37″ tires mounted on beadlock wheels. Beadlock wheels allow you to run lower tire pressures without fear of the tire coming off the wheel at high speeds. A set of four good quality beadlock wheels can cost around $2,500, while each 37″ tire will set you back about $400-$500 apiece. Engine: A powerful engine is critical in a race-bred trophy truck. Many builders opt for LS3 or LS7 engines from General Motors, which can produce upwards of 550 horsepower right out of the box.

Expect to pay around $15,000 for a good quality LS engine.

What Exhaust Do Trophy Trucks Use?

The exhaust system on a Trophy Truck is one of the most important parts of the vehicle. It is responsible for removing excess heat and fumes from the engine, and it also helps to improve performance. There are many different types of exhaust systems available for Trophy trucks, but the most popular type is the side-exit system.

This type of system exits the exhaust gases out the side of the vehicle, away from the engine. This helps to keep the engine cooler and improves performance.

What are Trophy Truck Chassis Made Of?

The chassis of a trophy truck is the most important part of the entire vehicle. It is what everything else is built around and what supports the weight of the engine, transmission, drivetrain, and body. The chassis must be strong enough to handle rough terrain and high speeds while still being lightweight enough to allow for quick acceleration and maneuverability.

There are three main types of materials that are used to construct trophy truck chassis: aluminum, steel, and carbon fiber. Each has its own advantages and disadvantages that need to be considered when choosing which material is right for a particular build. Aluminum is the most popular choice for trophy truck chassis due to its strength-to-weight ratio.

It is also relatively inexpensive compared to other options. However, aluminum does have some drawbacks. It is not as stiff as other materials, so it can flex and bend under load.

This can lead to handling issues at high speeds or when driving on rough terrain. Additionally, aluminum is susceptible to corrosion over time if not properly protected. Steel is another option for building a trophy truck chassis.

It is much stronger than aluminum but also significantly heavier. This makes it less desirable for many builders who are looking to save weight wherever possible. Steel can also rust over time if exposed to moisture or salt air (common near coastal areas).

However, it will typically last longer than aluminum before showing any signs of wear or tear. Carbon fiber is the strongest and lightest option available for building a trophy truck chassis. However, it comes with a hefty price tag that puts it out of reach for many builders on a budget.

Carbon fiber can also be difficult to work with if you don’t have experience working with composite materials . Additionally , carbon fiber isn’t as resistant to corrosion as other materials , so it may require more frequent maintenance in humid or salty environments .

How to Build a Rc Trophy Truck?


Rc Trophy Truck Kit

An Rc Trophy Truck Kit is a great way to get into the world of RC trucks. These kits come with everything you need to build your own truck, including the body, tires, and suspension. They are easy to assemble and can be up and running in no time.

If you are looking for a new hobby, or just want to get into the world of RC trucks, an Rc Trophy Truck Kit is the perfect place to start. These kits provide everything you need to build your own truck, and they are easy to assemble. You can be up and running in no time, and you will have a blast doing it.

Custom 4X4 Rc Trophy Truck Build

Looking to add a little extra excitement to your RC adventures? Why not try your hand at building a custom 4×4 trophy truck? These bad boys are built for speed and can handle just about any terrain you throw at them.

With a little bit of time and effort, you can have your very own trophy truck that will be the envy of all your friends. To get started, you’ll need to gather some supplies. For the body, we recommend using a solid piece of plastic or aluminum.

You’ll also need some strong magnets to attach the body to the chassis. For the wheels, we recommend using off-road tires with plenty of tread. And finally, you’ll need a powerful motor and battery pack to make this thing move.

Now that you have all the supplies, it’s time to start building! Begin by cutting out the shape of your body from the sheet of plastic or aluminum. Next, attach the magnets to the underside of the body so it will stay in place on the chassis.

Then, mount the motor and battery pack onto the chassis and connect everything according to your specific model’s instructions. Finally, screw on the wheels and voila! You now have a custom 4×4 trophy truck that’s ready for action.

Take it for a spin around your neighborhood or local park and see what this baby can do! We guarantee you’ll be impressed with its speed and handling abilities. With a little bit of practice, you’ll be zipping around like a pro in no time flat.

So what are you waiting for? Start building today!

Rc Trophy Truck 1/10

If you’re a fan of big, beefy trucks, then the RC Trophy Truck 1/10 is the perfect choice for you. This tough truck can handle any terrain, thanks to its 4WD drivetrain and large tires. Plus, it looks just like the real thing!

The RC Trophy Truck 1/10 is a great choice for anyone who wants a tough and durable truck. Thanks to its 4WD drivetrain, it can handle any terrain. Plus, its large tires make it perfect for off-road use.

And if you’re looking for a realistic truck experience, this one is definitely for you.


If you’re a fan of RC trucks, then you know that trophy trucks are some of the most popular vehicles out there. They’re big, they’re fast, and they look awesome. But what if you don’t have the money to buy a ready-made trophy truck?

Well, never fear! With a little time and effort, you can build your own RC trophy truck. The first step is to find a good base vehicle.

A lot of people use the Traxxas T-Maxx for their trophy trucks, but any good quality RC truck will do. Once you have your base vehicle, it’s time to start adding on the parts that will turn it into a trophy truck. One of the most important things to add is a roll cage.

This will protect your truck in case it flips over, and it also looks really cool. You can either buy a roll cage kit or make your own out of aluminum tubing. Another essential part of any trophy truck is big tires.

You’ll need tires that are at least 2.2 inches in diameter, and they should be nice and wide so that they can grip the terrain well. There are lots of different kinds of tires available, so take your time and pick ones that will work well for how and where you plan on driving your truck. Once you’ve got your roll cage and tires installed, it’s time to start thinking about suspension.

Trophy trucks need to be able to handle rough terrain, so suspension is very important.

Michael Sayers

Hi, this is your friend Michael Sayers. I’m an automobile engineer, but I have become an expert on RC cars. Seems funny to you! After graduating in automobile engineering, I worked for a renowned car manufacturing company for six months only. A few months later, I joined a popular RC vehicle manufacturing company as a quality in charge. However, I’ve created this site Altimarc, to share my decade of experience with people looking for an RC vehicle who don’t have adequate knowledge about that.

Recent Posts